Trojnápravový príves/plato pre prepravu strojov Cyklomet EU RM-240

Technical data - Cyklomet RM-240

• Type / Variant / Version according to homologationEU T-5 131 61
• Administrative capacity without ramps/with ramps~17 800 / 17 000 kg*
• Technical load capacity without ramps/with ramps~23 800 / 23 000 kg*
• Permissible total administrative/technical weight24 000 / 30 0000 kg
• Curb weight without ramps / with ramps~6 200 / 7 000 kg*
• Number of axles3
• Length 11 260 mm
• Base width / with extensions extended2 550 / 3 000 mm
• Lower deck floor height from ground~886 mm
• Upper deck floor height from ground~1 065 mm
• Box typeplatform

Features and accessories

• Hot-dip galvanized frame (with cut corners) (protection of the structure outside and inside the profiles).
• The upper deck is made of 5 mm thick galvanized sheets, the lower deck is made of 50 mm thick oak boards and the wheels are made of 5 mm thick galvanized sheets
• Lower deck with extendable extensions up to 3 m covered with oak stacks hidden in the middle of the deck
• Y-type drawbar with replaceable tip, approved in accordance with UN ECE Regulation 55 (Reg. 55 UN ECE) and 167/2013*2015/208 ND
• 2 adjustable springs supporting the drawbar
• Screwed hitch link fi 40
• Rear trailer ramp legs extend manually
• Parking brake implemented using diaphragm-spring actuators
• Rods in the side rails of the frame to secure the load
• Transport eyes on the side stringers and the middle part of the deck
• Homologated hot-dip galvanized rear bumper
• Lighting installation connection cable with 7PIN 12V plug
• 12V lighting, homologated – LED
• Homologated dual-line pneumatic braking system with automatic braking force regulator on the front and rear axles
• New wheels 235/75 R17.5 LingLong
• Axles from the renowned ADR company, full beam with a square cross-section of 100 mm, brake 300×135
• Suspension on parabolic springs
• Two wheel chocks placed in galvanized pockets
• Wheel fenders on all axles
• Basket for two spare wheels
• Two tool boxes

Additional equipment

• Aluminum rear ramps
• Rear hydraulic ramps (hydraulic distributor control) with ramp extension option. 1,750 – 2.78 mm spacing adjustment (external dimensions)
• Double-acting hydraulic support legs with independent support control
• Cable and radio-controlled hydraulic winch
• Hydraulic quick coupler with line pressure eliminator
• Hot-dip galvanized grid at the front of the platform, 1405 mm high (option for transporting bales)
• Dimension boards
• Drawbar eyelet 50 mm
• Ball rod 80 mm
• New spare wheel 235/75 R17.5
• New wheels 235/75 R17.5 Matador
• New spare wheel 235/75 R17.5 Matador
• Warning triangle (slow-moving vehicle warning sign)
• LED warning beacon