Pásový zhrňovač krmovín REITER RESPIRO R6/R7 rd

Never drive over the forage again

The new belt rake for tractors with reverse drive. With conventional rotary rake technology, the forage is pressed into the ground in the tractor track, which leads to increased dirt accumulation, raking and crumbling losses. With the RESPIRO push-track belt rakes, these disadvantages are eliminated because they never drive over the forage again! This is the only way to achieve unique forage quality and fewer losses. Practitioners confirm the outstanding quality of work achieved by the flexible pick-up and the trailing tines. The many positive effects of clean forage create the added value that makes this technology a highly profitable investment. Customers also appreciate the good view of the working units – driving like with a self-propelled sprayer. Arguments that convince the farmer and the contractor!

The RESPIRO push-drive belt rake is very flexible in use, whether in silage, solid forage, dry hay or for raking straw. In addition, field corners and areas with obstacles can be easily cleaned. In order to gather sufficient swath mass for the harvesting technology, it is no problem to lift swaths several times. Compared to conventional rotary rake technology, there is no additional increase in forage contamination.

Mounting / folding framework / parking

• Attachment Cat III
• Robust construction long service life of the frame
• DW folding Safe folding even on slopes
• Mechanical transport lock Can be released hydraulically during road transport – no cable pull

Compact in Transport

• Transport width: 2.40 m
• Secure transport locking of the work units by releasing the spring tensioner no rocking
• Lighting carrier with warning signs as standard Safe road transport

Kinematic for working unit

• Suspension via roller system Patented kinematics for optimum ground tracking 2 rollers and top link guide the working unit Center of gravity close to the tractor Long service life
• Spring relief via 4 spiral springs hydraulically adjustable fast response and low friction low contact pressure less wear and tear less damage to sward integrated locking mechanism for road transport easy adjustment via controls (scale visible from tractor seat)

Perfect lateral ground hugging

• Working units +/- 10 degrees

Perfect ground hugging lengthwise

• Angle adjustment in longitudinal direction Very good tine guidance Uniform raking height

Headland position

• Excavation via tractor lifting gear Optimum use of existing hydraulics Simple and fast
• Very high maneuverability

Hydraulic pick-up, rotor and belt drive

• Over 2 EW from the tractor System speed is set via the oil quantity from the tractor Belt speed can be set separately via the control terminal
• Oil cooler on the machine

Operation

• Operation of pick-up, rotor and belt via 2 EW control units
• Excavation via tractor lifting gear
• Terminal (LS or pressure circulation required) Folding in working or transport position Deposit direction (side deposit left or right / ploughing apart) Belt switch-off at the push of a button, so that corners can be cleaned out cleanly, for example Rotor height Relief of the belt units

Necessary connections / tractor requirements

• 2xEW for belt operation Minimum flow rate 2x 60 l/min electrical control units with flow rate regulation
• Loadsensing for snap frames
• 3-pin power socket for operation and oil cooler
• Reversing device
• Min. 180 hp on flat surfaces (6 cylinders) with 800 – 1200 kg front ballast
• Hydraulic top link an advantage
• Oil pump: at least 160 l/min